GE Monogram ZW9000SJSS Fiche technique

Naviguer en ligne ou télécharger Fiche technique pour Non GE Monogram ZW9000SJSS. GE Monogram ZW9000SJSS Spec Sheet [pl] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 6
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
OVERALL DIMENSIONS
FRONT VIEW (SHOWING CUTOUT OVERLAP)
TOP VIEW
SIDE VIEW
1 3/32"
(2.8)
25 19/32" (65)
handle width
28 1/2" (72.4)
cutout width
30" (76.2)
10 1/2"
(26.7)
5/8"
(1.6)
9 1/4"
(23.5)
cutout height
9"
(22.9)
26 1/2" (67.3)
including handle
23 1/4" (59.0)22" (55.9)
27 15/16" (71.0)
23 1/4"
(59.0)
1 9/32"
(3.2)
2"
(5.1)
Dimensions in parentheses
are in centimeters unless
otherwise noted. Actual
product dimensions may
vary due to manufacturing
tolerances.
For more details refer to the installation instructions
for this product.
Product Specification Created 9/14
GE Monogram
®
30" Warming Drawer
SPECIFICATIONS
Overall Width 30" (76.2 cm)
Overall Height 10 1/2" (26.7 cm)
Overall Depth 23 1/4" (59.0 cm)
Drawer Capacity 1.90 cu. ft. (53.8 l)
Cut-out Width 28 1/2" (72.4 cm)
Cut-out Height 9 1/4" (23.5 cm)
Cut-out Depth 23 1/2" (59.7 cm)
Power Cord Length 56" (142.2 cm)
Electrical Rating 450W @ 120V/60Hz
Total Amps 15 Amps
Net Weight 59 lbs. (26.8 kg)
Approx. Shipping Weight 65 lbs. (29.6 kg)
OPTIONAL ACCESSORIES
Custom Panel Kit ZXD30B
Professional Panel Kit ZXD9030P
ZW9000SJSS
ATTENTION ELECTRICIAN:
This appliance is supplied with a 56" (142.2 cm)
long electrical cord equipped with a 3-prong
(grounding) plug that mates to a standard
3-prong grounding wall outlet.
The electrical power cord is located on the right
side of the warming drawer. Locate the wall
outlet within easy reach of the electrical cord in
an adjacent cabinet, within 42" (106.7 cm) of the
right side or 16" (40.6 cm) from the left side of the
cut-out. A recessed outlet can be installed on the
right side of the cut-out, 7" (17.8 cm) max. from
the rear of the cabinet.
DO NOT USE AN EXTENSION CORD
WITH THIS PRODUCT.
Vue de la page 0
1 2 3 4 5 6

Résumé du contenu

Page 1 - ZW9000SJSS

OVERALL DIMENSIONS FRONT VIEW (SHOWING CUTOUT OVERLAP)TOP VIEWSIDE VIEW1 3/32"(2.8)25 19/32" (65)handle width28 1/2" (72.4)cutout width

Page 2

NOTESA Warming drawers are approved for installation below only certain specified wall oven and cooktop models. See the label attached to the top of t

Page 3

NOTESA If you are installing in frameless cabinets, it may be necessary to install 1/2" wide cleats to accept drawer mounting screws. See drawer

Page 4

NOTESThis kit contains a mounting panel to support a trim-less custom drawer front up to 3/4" thick. The original tubular handle can be reinstal

Page 5

NOTESThis kit contains a stainless steel professional style panel with a handle and lamp jewel imbedded in the bottom right side. This is a one-piece

Page 6 - On/Off Rocker Switch

FEATURES AND BENEFITSRInfinite Setting Temperature Control – 75 Degrees to 230 DegreesVariable Humidity Control – Crisp to MoistRemovable Half Rack1.9

Commentaires sur ces manuels

Pas de commentaire