GE Monogram ZIS420NK Manuel d'installation

Side by Side RefrigeratorsDesign Guide With Installation InstructionsInstallationInstructionsmonogram.comGE is a trademark of the General Electric Com

10Design Guide - Standard Installation1/4"1/2"3/4"1"1-1/4"1"3/4" OverlayPanel(Nominal Size)Stainless Steel1/4"

1/4"1/2"3/4"1"1-1/4"1/4"1/2"3/4"1"1-1/4"1-1/2"23-7/8"From Rear of Refrigerator3/4" Ov

12DISPENSER TRIM FIT EXAMPLES:(NOT TO SCALE)1/4” FRAMED PANEL• The dispenser trim fits over the custom panel and snaps into the freezer door. • The cl

13TOOLS AND MATERIALS REQUIRED• Tinsnips to cut banding• Stepladder• 1” Bit extension• Tape measure• Gloves• 1/4” Drywall screws• 5-Gal. Bucket with c

Installation Instructions - Standard Installation STEP 1 REMOVE PACKAGINGWARNING Tip Over Hazard. The refrigerator is much heavier at the top than

15 STEP 4 INSTALLATION WITH HOUSEHOLD WATER FILTRATION SYSTEMSkip this step if you do not have a household water filtration systemIf the water supp

16 STEP 7 LEVEL REFRIGERATOR All models have 4-point leveling. The front is supported by leveling legs, the rear is supported by adjustable wheels. B

Installation Instructions - Standard Installation STEP 9 ADJUST DOOR SWINGNOTE: This refrigerator has a 3-position door stop: 90°, 115°, and 130°. Wh

STEP 11 INSTALL 1/4” FRAMED PANELSInstall door panels:• Open the door to 90°. Remove the 6 Phillips head screws from the door handle.• Remove the h

STEP 11A INSTALL OVERLAY PANELSInstall door panels:• Open door to 90°. Remove the 6 Phillips head screws from the door handle.• Remove the handle. R

Safety Information2BEFORE YOU BEGIN Read these instructions completely and carefully.• IMPORTANT – Save these instructions for local inspector’s use.

STEP 12 CONNECT WATER SUPPLY• Locate and bring the tubing to the front of the cabinet.• Turn the water on to flush debris from the line. Run about a

21 STEP 12 CONNECT WATER SUPPLY (continued)Installation Instructions - Standard Installation STEP 14 START ICEMAKER• Slide the switch to ON. The ice

22Installation Instructions - Standard InstallationINSPECT FINAL INSTALLATIONCheck door alignment. Stand back away from the refrigerator to inspect th

Instructions for Flush Installation23

Design Guide - Flush InstallationTHE INSTALLATION SPACEWater And Electrical Locations The opening must be prepared with the electrical and the cold wa

CUSTOMIZATION BASICS: These refrigerators are designed to be customized with decorative panels. Field installed custom door and grille panels are requ

26Design Guide - Flush Installation1/2” OVERLAY PANEL DIMENSIONSFor a more custom appearance, overlay panels may be installed on trimmed models. The o

27Design Guide - Flush Installation36” Side-by-Side Fresh Food Freezer Grille Dispenser Cutout Position E F3/4” Raised Pan

28Design Guide - Flush Installation3/4” RAISED DOOR PANEL ROUTINGFor 3/4” raised door panel, routing is required. The router depth is 1/4” all the way

29Design Guide - Flush Installation3/4” RAISED GRILLE PANEL ROUTINGFor 3/4” raised grille panel, routing is required. The router depth is 1/4” all the

ADVERTENCIA Risque de basculement Ces réfrigérateurs présentent une partie supérieure lourde, en particulier avec une porte ouverte; ils doivent do

30DISPENSER TRIM FIT EXAMPLES:(NOT TO SCALE)CUSTOM PANEL• The dispenser trim fits over the custom panel and snaps into the freezer door. Custom Panel

31TOOLS AND MATERIALS REQUIRED• Tinsnips to cut banding• Stepladder• 1” Bit extension• Tape measure• Gloves• 1/4” Drywall screws• 5-Gal. Bucket with c

Installation Instructions - Flush Installation STEP 1 REMOVE PACKAGINGWARNING Tip Over Hazard. The refrigerator is much heavier at the top than at

33 STEP 4 INSTALLATION WITH HOUSEHOLD WATER FILTRATION SYSTEMSkip this step if you do not have a household water filtration systemIf the water suppl

STEP 8 LEVEL REFRIGERATOR All models have 4-point leveling. The front is supported by leveling legs, the rear is supported by adjustable wheels. Bot

35Installation Instructions - Flush Installation STEP 9 ADJUST DOOR SWINGNOTE: This refrigerator has a 3-position door stop. When space does not allo

Installation Instructions - Flush Installation STEP 10 INSTALL GRILLE PANELTo insert the framed or overlay panel into the grille:• Raise the grille

STEP 11 INSTALL OVERLAY PANELSInstall door panels:• Open door to 90°. Remove the 6 Phillips head screws from the door handle.• Remove the handle. Re

38Installation Instructions - Flush InstallationSTEP 11 INSTALL OVERLAY PANELS (continued)Custom Handles• Custom handles must be used for flush insta

39 STEP 12 CONNECT WATER SUPPLY• Locate and bring the tubing to the front of the cabinet.• Turn the water on to flush debris from the line. Run about

4ContentsSafety 2, 3Instructions for Standard Installation 5-22Planning GuideThe Installation Space 6Dimensions and Clearances 6Customization Basic

40Installation Instructions - Flush Installation STEP 15 INSTALL TOEKICKS• Locate the supplied toekicks (shipped taped to the side of the refrigerato

Instructions for Stainless Steel Installation41

BADesign Guide - Stainless Steel InstallationTHE INSTALLATION SPACEWater And Electrical Locations The opening must be prepared with the electrical an

CUSTOMIZATION BASICS: Professional Style Stainless Steel RefrigeratorsStainless steel wrapped refrigerators have beveled edges and professional-style

Design Guide - Stainless Steel Installation1/4"1/2"3/4"1"1-1/4"1"3/4" OverlayPanel(Nominal Size)Stainless Steel1/4&

1/4"1/2"3/4"1"1-1/4"1/4"1/2"3/4"1"1-1/4"1-1/2"23-7/8"From Rear of Refrigerator3/4" Ov

46TOOLS AND MATERIALS REQUIRED• Tinsnips to cut banding• Stepladder• 1” Bit extension• Tape measure• Gloves• 1/4” Drywall screws• 5-Gal. Bucket with c

Installation Instruction - Stainless Steel Installation STEP 1 REMOVE PACKAGINGWARNING Tip Over Hazard. The refrigerator is much heavier at the to

48 STEP 4 INSTALLATION WITH HOUSEHOLD WATER FILTRATION SYSTEMSkip this step if you do not have a household water filtration systemIf the water supp

49 STEP 7 LEVEL REFRIGERATOR All models have 4-point leveling. The front is supported by leveling legs, the rear is supported by adjustable wheels. B

Instructions for Standard Installation5

50 STEP 10 CONNECT WATER SUPPLY• Locate and bring the tubing to the front of the cabinet.• Turn the water on to flush debris from the line. Run about

51Installation Instruction - Stainless Steel Installation STEP 13 INSTALL TOEKICKS• Locate the supplied toekicks (shipped taped to the side of the re

52Notes

53Notes

Printed in the United StatesNOTE: While performing installations described in this book, safety glasses or goggles should be worn.For Monogram® local

BADesign Guide - Standard InstallationTHE INSTALLATION SPACEWater And Electrical Locations The opening must be prepared with the electrical and the co

CUSTOMIZATION BASICS: These refrigerators are designed to be customized with decorative panels. Field installed custom door and grille panels are requ

1/4” FRAMED PANEL DIMENSIONS8If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame o

36” Side-by-Side (in inches)Dispenser Cutout PositionABCD E F G1/4” Backer Panel 33-7/8 9 68-3/8 14-9/16 18-9/16.10” Spacer Panel 33 8-3/8 67 13-1/4 1